| 1. | Seat tightness achieved with torque as opposed to line pressure
利用扭矩而不是管路压力来实现阀座的密封。 |
| 2. | Lps line pressure switch
管路压力开关 |
| 3. | 738 - 2 pressure regulators for use with medical gases . part 2 : manifold and line pressure regulators
医用气体压力调节器.多功能和线状压力调节器 |
| 4. | Pressure regulators for use with medical gases - manifold and line pressure regulators
医用气体用的压力调节器.供气支管压力调节器和输气管道压力调节器 |
| 5. | Check initial pressure to see if full intended line pressure is applied at the valve inlet
检查初始压力，看看是否全部预设管道压力是否应用在阀门进口处。 |
| 6. | Controlled closing of the valve , opens the mainline check valve , gradually increasing line pressure
阀门受到控制的关闭操作，开启主管线止回阀，逐渐增加管线压力。 |
| 7. | The valve reopens during shut - down cycle to gradually decrease line pressure and prevent shock
在关闭周期内，阀门将重新开启，以逐渐降低管线压力，防止出现冲击现象。 |
| 8. | Conversely , by opening the bleed , line pressure will blow out any accumulation when the plug is lifted
反过来，通过开启排气装置，当阀塞升起时，管路压力将吹出任何累积物。 |
| 9. | Release the paint line pressure and switch off the power before doing maintenance with the sprayer or changing accessories
在保养喷漆枪或者更换配件之前，松开喷枪压力阀并且关闭电源。 |
| 10. | Pressure regulators for use with medical gases - part 2 : manifold and line pressure regulators iso 10524 - 2 : 2005 ; german version en iso 10524 - 2 : 2006
医用气体用压力调节器.第2部分:进气压力调节器和线性 |
